Untethered six-minute walk test
Vyntus™ WALK allows patients to perform an untethered six-minute walk test (6MWT) by wearing wireless sensors that communicate data to a technician-held tablet PC. Standardize testing to the recommended is 6MWT protocol, because consistent testing yields consistent data for comparison
The system is both patient- and technician-friendly and because we know a single sensor does not fit all clinical needs, comes with an array of easy-to-wear sensors. Because standardizing the complete testing process is critical to meaningful data for patient trending, Vyaire has integrated the complete ATS testing standards in the workflow-driven tablet software application.
It is likely that multiple technicians will be asked to perform 6MWTs on patients. Without a strict, standardized protocol, each technician could slightly vary how they run the test, what commands they give the patient, and the parameters they record, all of which can lead to variable data that delivers less-accurate data trends. Vyntus WALK is standardized to run the recommended American Thoracic Society (ATS) 6MWT protocol, because accurate comparison requires consistent testing that yields consistent data.
One of the cardinal rules of a good 6MWT is to have the patient walk of their own volition. But if the patient is tethered to the technician by a pulse oximeter cable, and the technician is walking just behind the patient, the patient’s performance can be directly influenced or affected. Vyntus WALK uses Bluetooth™ wireless pulse oximeter technology that allows the patient to move through the entire course and limits technician influence. Also, the sensor provides a more complete HR and SpO2 reading over time.
Not every clinician prefers to view data the same way. That’s why with Vyntus WALK, you first see the data as its being collected graphically over time. But with the simple swipe of a finger, you can switch to the Easy-View mode, displaying large numeric values for HR and SpO2. Swipe back, and you are back to viewing graphically over time. And if the patient needs to pause, Vyntus WALK will continue to show both active HR and SpO2 values throughout the pause time screen.
Vyntus WALK can be run as a standalone device generating a standard report, or the data can move in and out of SentrySuite software for a more robust interpretation and trending report
As a standalone device, users quickly enter patient demographics directly on the tablet PC, run the 6MWT, and print a standard report using one of two options:
As a device connected to SentrySuite, users receive demographics from SentrySuite, run the 6MWT, and then return completed test data to SentrySuite. From SentrySuite, more options are available:
Service is essential to keep medical equipment operational and safe. Our Nordic service team consists of experienced service technicians stationed across the Nordic countries. Our service technicians are ready to take on your every service need.”
Valiant 2 rehab XL – Robust and reliable treadmill for rehabilitation in extra large size
Modern designed treadmill specifically designed for rehabilitation. The low step-up height makes the treadmill perfectly suitable for all test subjects in the field of rehabilitation. The emergency stop with magnetic lanyard on the standard front handrail provides additional safety for the user. The Valiant 2 rehab offers a smooth acceleration from 0 km/h and is continuously adjustable in a range of 0,1 – 12 km/h (0.06 – 7.5 mph). The network module provides control within a Lode software network (LEM, LRM or LCRM). Thanks to the unique low design of the cover plate it is possible to place a mirror or camera in front of the treadmill which makes it easier to monitor the gait of the test subject. The Valiant 2 rehab XL has a standard running surface of 60 x 170 cm and 0-25% elevation. The treadmill is supplied with a 7″ control unit with touchscreen for manual control and a bottle holder.
A USB A-B cable only for service purposes will be standard delivered with the product.
To connect LEM, LRM or LCRM you need a special interface cable that can be ordered.
Reliable respiration monitoring
The SISS BABYCONTROL monitors respiration of babies and infants and can thus provide reliable assistance against «Sudden Infant Death». High reliability, simple operation and convenient size make the SISS BABYCONTROL® a universally applicable instrument for baby monitoring in hospitals or at home.
Being prepared
Still today, “Sudden Infant Death” is an unforeseeable occurrence. 80% of the affected infants are entirely healthy beforehand. Only 20% are from so-called risk groups (former premature births or babies already suffering from life-threatening conditions or with a «Sudden Infant Death» among close relatives). Only a prompt alarm in the event of irregularities provides the chance to apply life-saving measures within the shortest possible time. Such measures should be learned beforehand in special courses.
Valiant 2 rehab – Robust and reliable treadmill for rehabilitation
Modern designed treadmill specifically designed for rehabilitation. The low step-up height makes the treadmill perfectly suitable for all test subjects in the field of rehabilitation. The emergency stop with magnetic lanyard on the standard front handrail provides additional safety for the user. The Valiant 2 rehab offers a smooth acceleration from 0 km/h and is continuously adjustable in a range of 0,1 – 12 km/h (0.06 – 7.5 mph). The included network module provides control within a Lode software network (LEM, LRM or LCRM). Thanks to the unique low design of the cover plate it is possible to place a mirror or camera in front of the treadmill which makes it easier to monitor the gait of the test subject. The Valiant 2 rehab has a standard running surface of 50 x 150 cm and 0-25% elevation. The treadmill is equipped with a 7″ control unit with Touchscreen for manual control and a bottle holder.
A USB A-B cable only for service purposes will be standard delivered with the product.
To connect LEM, LRM or LCRM you need a special interface cable that can be ordered.
Electrical Safety Analyzer
The Rigel 288+ electrical safety analyzer offers an accurate and fast solution for meeting international and local safety standards.
Enjoy complete freedom to move around, without the need for mains voltage, thanks to battery powered test capability. Using standard AA batteries, tests can be carried out for insulation, earth/ground bond testing, and touch or point-to-point leakage current testing.
Brochure
